6.1 C
London
Thursday, December 12, 2024

3-Step Guide: Fix Netgear Extender Not Connecting to Router

- Advertisement -spot_imgspot_img

Is your Netgear WiFi extender not connecting to router? Yes? Oh snap! Then, you might be having issue doing Netgear WiFi extender login too, right? Well, don’t sweat over it! You are at the right article. Here,  what we will do – we will guide you through a number of tested and proven troubleshooting tips – that will help you get rid of the Netgear extender not connecting to router issue in a fly. So, without thinking much – let’s take the plunge, shall we?

First of all – let’s take you through the common reasons causing the Netgear extender not connecting to router issue. Read on!

[Reasons] Netgear Extender Not Connecting to Router

Highlighted below are some common reasons causing the issue in discussion:

  • Netgear extender’s power LED is blinking amber or red
  • Improper placement of the extender
  • The extender placed away from the reach of your host router
  • Loose/improper Ethernet connection
  • Partial Netgear extender setup
  • Outdated firmware
  • Technical glitches

That’s all! These were some common reasons behind the Netgear extender not connecting to router issue. Now, let’s dig a little dipper to resolve it. Scroll down a little!

[Fixed] Netgear Extender Not Connecting to Router

Netgear Extender Not Connecting to Router: Basic Fixes

Prior to taking you through the advanced fixes to troubleshoot the Netgear extender not connecting to router issue, let’s guide you with the basic ones first, shall we?

  • Your Netgear extender must be powered on and receiving a fluctuation-free power supply from its respective wall outlet.
  • Each and every light on your Netgear extender must be green and stable, got it?
  • Your Netgear extender and the router must be placed at a safe distance (close proximity), ok? But not too close! Why? Because their signals may clash!
  • The hardware of your Netgear extender shouldn’t be faulty or damaged.

Fix 1: Aim for Optimal Extender Placement

Bear in mind – wrong placement of the device can lead you to Netgear extender not connecting to router issue. So, while placing your WiFi range extender, bear the following points in mind:

  • Choose a central and higher location in your home for your Netgear WiFi extender.
  • Also, your extender must not be placed in a congested, lower, or non-ventilated (heated) area.
  • Be sure to place the device i.e. the extender openly on a higher and clean surface. Do not place the device too closer to the roof.

Want More?

Access the mywifiext.net web address and see if your Netgear device is connected to the router. If the web page loads up without displaying any error message like mywifiext refused to connect, it means the issue has been fixed. If not, head towards the next fix.

Fix 2: Power Cycle Your Netgear Extender

Tried all the fixes listed above but still your Netgear extender is not connecting to router? Fret not! Power cycle the Netgear device once. To power cycle or restart your WiFi extender, go through the steps outlined underneath in exact given order:

  • Unplug your Netgear extender from the wall socket and also disconnect it from your router.
  • Wait for a couple of seconds.
  • Plug your WiFi extender back in.
  • Turn on your Netgear device, connect it to your router, and try to access the Netgear Genie setup wizard using mywifiext web address.

Fix 3: Check All the Cable Connections

Loose or improper wired connections between your Netgear extender and router can be one of the biggest reasons behind the issue. Keep the following points in mind while connecting your Netgear extender and router:

  • Don’t use a damaged or worn out Ethernet cable/ wire to connect your Netgear extender and router.
  • Try using a wireless source to connect your devices instead of Ethernet source.
Latest news
Related news