In order to perform Linksys extender setup, making your computer or mobile device access the network of the wireless range extender is a must. However, if you are not able to do so because of the Linksys extender setup xxx not appearing on the network list issue, then you have come to the right article. Here, we have talked about the topmost troubleshooting hacks using which you will be able to fix the issue at hand. Thus, continue reading.
[Resolved] Linksys Extender SSID Not Appearing Issue
-
Restart the Linksys Extender
The topmost reason why you are experiencing the Linksys extender network name not appearing on the network list issue is because of technical glitches. However, getting rid of these glitches is very much possible if you restart your Linksys wireless range extender. In order to make your networking device turn into a new leaf, all you need to do is, turn it off and on. Once done, check if the issue at hand has said its goodbyes.
-
Switch the Connection Source
Considering you are reading this hack, it means that the Linksys extender network name not appearing on the network list issue is still on your back. Well, it might be because you have not used a cable to connect the networking devices. Instead, you made use of a wireless source of connection. Thus, rectify your mistake by connecting your wireless range extender to the host router using a wired source.
Apart from this, make sure that not too much distance is separating your networking devices. Otherwise, no matter what you do, you will not be able to get rid of the Linksys extender network name not appearing on the network list issue. Therefore, consider listening to us.
-
Check the Ethernet Connection
Let us assume that you have used an Ethernet cable to connect the networking devices, then why you are experiencing the Linksys extender network name not appearing on the network list issue? Well, it might be because a damaged Ethernet cable has been used. To take care of the problem, you need to replace the existing cable with a new one. Once done, check again if the Linksys extender network name not appearing on the network list issue has been fixed.
If you are still experiencing it, then waste no more time referring to the next troubleshooting hack. Just because one hack was not helpful for you, does not mean the others will not be as well. Thus, continue reading this post.
-
Update the Extender Firmware
You can also try to update the firmware of your Linksys wireless range extender to its latest version to troubleshoot the Linksys extender network name not appearing on the network list issue. Performing Linksys extender setup will not just fix the issue at hand for you but it will also help you to get rid of the Linksys orange light issue. Thus, refer to the guidelines given in the user manual and update the firmware of your device now.
-
Perform Factory Default Reset
Did none of the aforementioned tips help you to resolve the Linksys extender network name not appearing on the network list issue? Well then, we just have one hack that might be able to help you fix it. For that, you need to restore your networking device to its latest version. You can do so by hitting the Reset button on the wireless range extender. Do not forget to set up your device using the WPS method or the Manual method.
Final Note
After following the troubleshooting hacks mentioned in this post, you will be able to resolve the Linksys extender network name not appearing on the network list issue. On the off chance, you are still facing the Linksys extender network name not appearing on the network list issue, it is recommended that you check your wireless range extender checked. Perhaps, there is something wrong with your device itself.
If you are aware of any other hack through which the Linksys extender network name not appearing on the network list issue can be resolved, consider sharing it with your fellow readers to help them out. Now, you might be wondering how you can do so. Well, make use of the comment section to share a few words.
