Performing Wireless-N WiFi repeater setup process makes it easier for users to access the internet without signal drop. But, like any other WiFi device – the WiFi repeater is also prone to technical issues. And, the red light issue is most common yet annoying among all.
Are you also facing the same issue? Yes? Well, don’t blow a fuse! It’s just a tiny issue face by every Wireless-N WiFi repeater user across the globe. In this particular article – we will provide you the effective hacks that will resolve the issue in discussion in a fly.
Let’s dig a little deeper!
[Reasons] Wireless-N WiFi Repeater Red Light Issue
Prior you give any troubleshooting hack a try to fix Wireless-N WiFi repeater red light problem – let’s make you familiar with the reasons first – why you are getting it.
Scroll down a little!
- You haven’t updated WiFi repeater’s firmware or updated wrong firmware version
- Wireless-N WiFi repeater setup process not completed or performed in the correct order
- Technical glitches
- Bad placement of WiFi repeater
- The WiFi signals of your WiFi repeater are getting interrupted
- Your repeater is not receiving a proper power or the socket to which it is plugged in is damaged
That’s it! Now that, you have come to know the reasons causing Wireless-N WiFi repeater red light issue, let’s make you familiar with the fixes to resolve it.
[Resolved] Wireless-N WiFi Repeater Red Light Issue
Fix 1: Restart Your WiFi Repeater
Restarting the WiFi repeater is the important hack that you can try in order to get rid of the red light issue.
Highlighted below are the steps that you can follow in order to restart your WiFi repeater:
- Unplug and power off your WiFi repeater
- Disconnect the router from your repeater along with PC, laptop, mobile devices, gaming console, etc (if connected).
- Wait for 5-10 minutes and plug your WiFi repeater back in.
Once you are done restarting your WiFi repeater, connect it to your disconnected devices and check whether you are able to fix the red light issue or not.
Still the same? Yes? Well, in that case – simply ensure – the repeater’s wall socket isn’t damaged and the socket is providing steady electricity to the repeater. Got it?
Fix 2: Perform Wireless-N WiFi Repeater Setup Properly
Remember that, if you haven’t set up your WiFi repeater properly – then also may come across with the red light issue. Therefore, access the WiFi repeater setup page using the default 192.168.1.250 IP – follow the on-screen instructions, and get the repeater configured in minutes.
While performing WiFi repeater setup process – make sure the device (repeater) is connected to your host router via WPS source.
No luck? If so, then we suggest you change the repeater’s location. Try this hack once! Place the repeater somewhere in higher and airy location of your home. And, if you have decided to relocate your repeater – change the router’s location as well.
No matter – where you place your repeater – ensure that – its WiFi signals won’t get interrupted by your neighbouring WiFi signals/ devices. To prevent this – avoid placing the WiFi repeater closer to doors, thick walls, and corners.
Fix 3: Update WiFi Repeater Firmware
Have you ever noticed that how your Smartphone’s, computers, or laptops stop functioning all of sudden whenever an update is pending? Yes? Same is the case with your WiFi repeater! Chances are that your WiFi repeater’s firmware is outdated and that is why it is giving you the red light issue to experience. No worries! Log in to your WiFi repeater and update the firmware right away and get rid of the red light issue. But, hold on! There are some important Wireless N firmware upgrade tips that you can’t afford to miss. To know them – kindly refer to the highlighted term.
Verdict
Our article on how to fix Wireless-N WiFi Repeater red light issue ends here. We hope that this piece of writing proved helpful to you. Yes? Great – and with the hope of helping you – we are wrapping up our article.
