How to Log in to Router Interface Using IP Address?

Routers can easily be accessible through different methods. Some brands provide URL, IP addresses, even apps to complete the router configuration.

These networking devices can connect with any other network device other then modem or ISP server socket like extenders, boosters, and signal repeaters.

Here, you will get to know how you can easily connect your router with the modem and set it up with the help of its IP address like 192.168.1.254, which you will find different in every networking device.

There are simple and easy steps that you will find here, just follow them and complete the installation. So why wait, lets start this article without any waste of time.

Connect Router to Home Modem First

The process of the linking a router to the modem is so simple and easy. You can connect them together physically with the help of the Ethernet cable.

1. You must check all the accessories are there in the router box like WiFi unit, Ethernet cable, power cord, and user manual.
2. Place all the accessories near to the modem, which should be an optimal location.
3. Then make sure that the Ethernet cable and power cord are in good condition.
4. Now, take the cable and insert its ends to the router’s WAN port and modem’s LAN cable.
5. It is time to turn router network on by connect its power cord to the wall socket and pressing On/Off button.

The router connection with the modem is not completed yet, to make it complete, you have to access the router interface with the help of your computer.

Access WiFi Interface via Computer

You will go through simple steps to reach to the WiFi interface login page, but for that you have to connect your computer to the router with the help of LAN cable.

1. Make the connection in between the computer and router, go to the web browser and type in the router IP address.
2. The IP address will be given in the user manual of the router along with the username and password.
3. By searching the IP, you will reach to the router’s interface login page, where just enter the login credentials (username and password).
4. Then, you will get to the interface dashboard of the router, here just configure the settings and adjust the networks.

With the help of interface dashboard, you can easily update the router system and change the admin credentials.

You should also follow some troubleshooting tips to make the router setup error free. Let’s take a quick look on tips written down here.

Tips and Some Solutions

• Must make sure that all the network devices are placed on an optimal spot.
• Don’t use cut or damaged cables like Ethernet cable or power cord to connect modem and supply power.
• Use updated web browser to log in the router interface and make sure that you are using correct IP address www.192.168.10.1.
• You should apply all the steps carefully one after one to make the setup successfully done and you can enjoy internet services in your house.

Wrap Note

Here, you have taken a short review to connect the router to the modem and reach the interface through IP of the router. There were also troubleshooting tips that help you to make connection stronger and error free.