Getting to know your Amped SR300 is the first step in its setup process. The Amped SR300 utilizes 802.11ac technology for range extending. Using two external antennae, the WiFi range extender immediately increases the signal strength of your existing WiFi network inside the house. In a nutshell, an Amped wireless SR300 extender strengthens and extends the range of your home’s WiFi network. The area it protects is up to 1200 square feet. Now, without beating about the bush, let’s get down to the basic requirements of installing an Amped SR300 device.

Amped SR300 Extender Setup Requirements

A working wireless connection
The domain name or IP address of your Amped SR300 extender
The WiFi booster has to be connected into a steady power source
A router that is already configured and two power sockets that must be present in a single room

Have you arranged the aforementioned things? So, it is time to take you through the journey of getting the Amped SR300 wireless range extender installed.

How to Set Up Amped SR300 Extender?

The instructions for installing the Amped SR300 wireless range extender are as follows.

Start up your laptop or PC.
You should position your Amped SR300 repeater close to your existing WiFi gateway.
Use an Ethernet wire to connect your Amped range extender to your router.
Visit the Amped extender configuration web page from any PC or laptop’s web browser.
It can be done by inserting the domain name of your range extender into the URL field.
You have reached the login page for the WiFi range extender.
Click the “Log In” button after entering the Amped extender’s default login information.
This is to inform you that some Amped extenders directly take you to the setup wizard after accessing the default web address i.e. http://setup.ampedwireless.com.
You can easily set up your SR300 by following the on-screen prompts.
To amplify an existing wireless network, choose its SSID.
Wireless network discovery at home might take a while.
As soon as you are finished, click the “Save” button to save your modifications.
Just unplug the Amped range extender and relocate it.
Make use of the WiFi range extender’s spot finder to determine its optimal installation position.

You may now test a real Internet connection by connecting your machine to the enhanced network.

Reads More: skunk haircut

Stuck with Amped SR300 Extender Setup?

These troubleshooting steps might be used if you are unable to finish the Amped extender setup SR300 procedure.

As a first step, plug the Amped extender into a working power source.
Your existing gateway needs to be close to the Amped SR300 range extender. Else, you will face internet connection problems amidst the configuration process.
You should reboot your SR300 range extender to make it free of minor technical bugs.
Wait until you aren’t getting a consistent green signal before beginning the Amped extender setup procedure.
Remove any temporary files before launching the web-based setup site.
The passphrase key is case-sensitive, so be careful while entering it.
Is Amped extender login screen frozen? Try resetting your Amped extender by pushing the reset button.
Prior to attempting to set up an older WiFi range extender, you should consider resetting it to its factory defaults.
For optimal performance, it’s essential that your Amped extender is running on the most recent firmware.
The Amped extender’s firmware is readily upgradable using the web-based configuration interface.

Final Words

That’s it! Assuming that you’ve successfully configured your Amped SR300 range extender, you should look forward to creating a security layer for it. Worry not! You need not do any additional activity for that. Just, locate the Password Change menu on the Amped dashboard and assign a new Amped wireless extender login passcode and username to your range extender. With that, no unauthorized dare to log in to your SR300 extender and tweak its settings.

Author Bio:

justplangrow.comjustplangrow
justplangrow
justplangrow
justplangrow
justplangrow

Visit And Explore Gangtok – Sightseeing at Its Best

Best Places to Visit in Elmira

Best Places to Visit in Brasilia

Best Places to visit in Vienna

Restoring Elegance: Essential Tips for Men on How to Repair a Cashmere Jumper

Trapstar Clothing Hoodies: Unleash Your Inner Style Icon.

Comfy and Whimsical Unicorn Shoes

Vlone City Morgue Unisex T-Shirt

Bevlone Fashion Jackets: Stylish and Trendy Outerwear for All Occasions

Learn to Set Up Amped SR300 Extender in Easy Steps

How to Set Up Amped SR300 Extender?

Stuck with Amped SR300 Extender Setup?

Final Words

Author Bio:

Express Yourself: How to Find the Perfect Tattoo Shops and Mehndi Artists in Your Area

Netgear Router is Not Connecting? Let’s Fix It!

How Do I Factory Reset Orbi Easily?

Is There a Way to Sync Synology with Google Shared Drive?

Express Yourself: How to Find the Perfect Tattoo Shops and Mehndi Artists in Your Area

Netgear Router is Not Connecting? Let’s Fix It!

How Do I Factory Reset Orbi Easily?

Is There a Way to Sync Synology with Google Shared Drive?

Editor Picks

Netgear Router is Not Connecting? Let’s Fix It!

How Do I Factory Reset Orbi Easily?

Is There a Way to Sync Synology with Google Shared Drive?

Must read

Netgear Router is Not Connecting? Let’s Fix It!

How Do I Factory Reset Orbi Easily?

Is There a Way to Sync Synology with Google Shared Drive?

Popular categories