I have installed a Netgear Orbi whole home WiFi system in my home. This system works great. It blankets my home with WiFi signal and creates a virtual mesh. But recently it started giving me trouble. I had to reset it to the factory settings. Now when I m trying to set it up again, it is not working. I tried using the Orbi app and web interface but nothing worked. Suggest to me what should I do now. Are you also going through a similar situation? Are you unable to set up your Netgear Orbi after reset? Use the instructions given in this guide to get rid of this problem.
Orbi Setup Not Happening After Reset? Try This!
Check Power Supply
A poor power supply to the Orbi devices can stop you from setting it up. Thus you need to make sure that the power supply is consistent. Verify the power cable and power socket. If any of them is broken then get it fixed right away. You can use a UPS if you feel the need to do so.
Use Correct Setup Instructions
Are you using the correct steps to complete the setup process? Looks like you are making some mistakes while setting up the process which is why you are getting stuck in between. You can set up your Orbi system by accessing the Orbi login page on the app or web interface. The WPS method can also be used to get this job executed. We want you to use the user manual and see how you can set up your Orbi device.
Verify Connection between Router and Modem
While you are setting up the Orbi system, you first need to make a connection between the router and modem. If the connection between these devices is not stable, then you are bound to get issues while the setup process. Thus make sure you are using an Ethernet cable that is in good condition to connect the devices. Also, use the correct ports and make solid connection between them. Use the LAN port on the modem and the Internet port on the Orbi router.
Reset it Again
There is a possibility that the reset process was not executed successfully previously which is why you can’t set it up again. To complete the setup process smoothly it is essential that the Orbi device is running on the factory settings. Failing in the setup process is an indication that Orbi is still not running on the default settings.
We want you to reset it once again. Use the instructions given below to know how to reset Orbi router:
- Connect the Orbi router to a power source and turn it on.
- Observe the power LED. The router must be properly powered up.
- Press the Reset hole using a paper clip for at least 10 seconds.
- This will reset your Orbi device perfectly.
Try setting it up now. We ar sure you will be able to get it done without any trouble this time.
The Final Note
Here comes an end to our helpful guide that is meant to assist you in fixing Netgear Orbi setup issues after resetting it. We are sure that the same issue is no longer bothering you. We recommend you update the firmware on your Orbi system once the setup is done. This will enhance its performance to a great extent.
To update the firmware, you need to access the Orbi admin dashboard and then execute the instructions on the screen.
