In case you have clicked on this article, chances are your Wavlink extender keeps rebooting. Well, we can’t even ask you to reboot your device. Rather, you have to follow some other Wavlink troubleshooting tips to resolve the extender keeps rebooting issue.

So, without further delay, let’s help you resolve the issue at hand. Make sure you go through each point with utter carefulness. If something is not applicable in your case, make sure you don’t try to implement it. Read on.

Extender Keeps Rebooting? Try These Tips

Update Firmware

Chances are your Wavlink WiFi firmware is outdated. That is why the device keeps rebooting. It happens when the device lacks security patches to fix the errors and issues in your extender. So, we urge you to go for a WiFi extender firmware update.

When you start the process, you must keep the Wavlink login password ready by your side. Make sure you get the latest software version of the firmware of your Wavlink repeater. Moreover, if possible, always keep the auto-update feature turned on.

Insufficient Power Supply

Another reason why your Wavlink WiFi repeater keeps rebooting is the insufficient power supply. The wall outlet could be inefficient. Or, the plug pins of your WiFi extender might be lost when you plug in the device to a power socket.

You should repair the chosen WiFi socket. If that is not possible, replace it with the new one. Also, you can choose a different power socket to power your device. Ensure that the power surge is consistent and stable. In case your area suffers from a power outage, make sure you get a UPS to keep your device turned on.

Faulty Cable Connections

In many cases, users use extension cords to plug in the Wavlink WiFi extender. It is done to do proper extender placement. Having a faulty cable connection could be the reason why your device keeps rebooting in this case.

Therefore, we suggest you use a new extension cord. Moreover, the repeater should not be loose when you plug it into the chosen socket. Even the connection between the range extender and router can put excess load on the device. Hence, you face the issue.

Extender is Overheated

Have you been using the Wavlink range extender 24/7? Are you not turning off the device when not needed? If so, the Wavelink WiFi extender will keep rebooting. It could be happening because your WiFi range extender is overheating.

So, the first thing you should do is turn off your WiFi range extender. You can do that during the night or when the device is sitting idle for a few hours. Furthermore, you can also turn on the access schedule feature of your range extender to choose the time to start on/off your device.

Faulty Hardware

Wavlink WiFi extenders are delicate pieces of hardware. Hence, a single hard push can damage your extender. So, the device will keep rebooting when the hardware is faulty. It means there could be something wrong with your Wavlink WiFi extender.

It can also be during the Wavlink extender setup process. During placement or even unboxing the range extender, you might have damaged your device. So, get it checked with technical experts or get the device replaced.

Too Far/Close Devices

When your range extender has to work harder, it will get heated. In return, the Wavlink WiFi extender will keep rebooting. One of the reasons behind the issue could be too far or near the placement of the extender or router.

So, you need to change the extender placement. Mark the range of your host router and place the extender in its circle. Choose a sweet spot within the router range. When you do that, your device can easily work without having to bear any additional pressure.

Conclusion

As you can see, reasons are numerous when it comes to the Wavlink WiFi device keeps rebooting issue. In many cases, users are completely at fault for using a short-circuited wall socket. It can damage the range extender from the inside. Moreover, power fluctuations can further damage the circuit of the Wavlink WiFi extender.

livejustnews.comlivejustnews
livejustnews
livejustnews
livejustnews
livejustnews

Wavlink Troubleshooting Tips for Extender Keeps Rebooting